No BORDER RGE

01 — WHAT IS SHOWTIME?

A RACE BOAT.
AN OPEN CHALLENGE.

SHOWTIME is a competition hydroplane designed to run in ground effect, just above the water.

This is not a production boat with a bigger motor bolted on. It was built for the American Power Boat Association’s Professional Racing Outboard — PRO — competition, where purpose-built racing engines and experimental engineering are part of the attraction.

In this kind of racing, small-displacement engines can make extraordinary power. Exotic prototypes and specialized mechanical ideas have a place here.

SHOWTIME is a capsule-class craft intended for the three largest PRO hydroplane displacement classes: 500ccH, 700ccH and 1100ccH.

There are class rules and safety requirements. But there is also room to think differently — and SHOWTIME carries engineering ideas that are not ready for public disclosure.

GROUND-EFFECT HYDROPLANEPRO COMPETITIONPURPOSE-BUILT ENGINEERING
“It is here, in this open crucible of unrestricted competition, that really new ideas and technology can be developed. And believe me… SHOWTIME has some really new ideas.”

02 — MECHANICAL WIZARDRY

THE DETAILS
ARE THE WORK.

Machined surfaces. Shafts and fittings. Parts that have to come together. Long before the finished silhouette, there is work to do at the bench.

Machined plates and cylindrical members arranged on the work surface.VIEW FULL IMAGE ↗
Machined plates and cylindrical members arranged on the work surface.
A shaft passing through a machined plate: a closer look at the fit.VIEW FULL IMAGE ↗
A shaft passing through a machined plate: a closer look at the fit.
Two machined circular components in a fitted case.VIEW FULL IMAGE ↗
Two machined circular components in a fitted case.
Circular component photographed beside a measuring rule.VIEW FULL IMAGE ↗
Circular component photographed beside a measuring rule.
A small machined metal part shown in a gloved hand.VIEW FULL IMAGE ↗
A small machined metal part shown in a gloved hand.
Small parts, tools and fittings laid out on the workbench.VIEW FULL IMAGE ↗
Small parts, tools and fittings laid out on the workbench.

03 — BRINGING IT TOGETHER

SEPARATE PARTS.
ONE MACHINE.

The view moves from the bench into the hull. Openings, tooling and exposed assemblies show the practical work of bringing the pieces together.

The open end of the hull with tooling extending into the interior.VIEW FULL IMAGE ↗
The open end of the hull with tooling extending into the interior.
Tooling positioned over a circular component inside the hull.VIEW FULL IMAGE ↗
Tooling positioned over a circular component inside the hull.
A circular access opening in the white bodywork.VIEW FULL IMAGE ↗
A circular access opening in the white bodywork.
Close view of a metal housing and adjoining assembly.VIEW FULL IMAGE ↗
Close view of a metal housing and adjoining assembly.
Exposed mechanical assembly at the rear of the craft.VIEW FULL IMAGE ↗
Exposed mechanical assembly at the rear of the craft.
A close view of the exposed rear assembly and surrounding structure.VIEW FULL IMAGE ↗
A close view of the exposed rear assembly and surrounding structure.

04 — THE MACHINE TAKES SHAPE

ENGINEERING,
GIVEN A SHAPE.

The cockpit, upper covers and bodywork begin to read as a complete craft. Detached panels and prepared surfaces keep the hands-on work visible.

The cockpit surround, side bodywork and upper cover.VIEW FULL IMAGE ↗
The cockpit surround, side bodywork and upper cover.
Bodywork positioned on the hull during development.VIEW FULL IMAGE ↗
Bodywork positioned on the hull during development.
Dark upper bodywork fitted over the hull with the rear assembly exposed.VIEW FULL IMAGE ↗
Dark upper bodywork fitted over the hull with the rear assembly exposed.
A second angle on the unfinished bodywork and open rear assembly.VIEW FULL IMAGE ↗
A second angle on the unfinished bodywork and open rear assembly.
The underside of a long bodywork section, supported separately in the shop.VIEW FULL IMAGE ↗
The underside of a long bodywork section, supported separately in the shop.
White finished bodywork with its existing markings visible.VIEW FULL IMAGE ↗
White finished bodywork with its existing markings visible.
The open end and inner structure of the detached upper cover.VIEW FULL IMAGE ↗
The open end and inner structure of the detached upper cover.
A long upper cover supported on stands, viewed from above.VIEW FULL IMAGE ↗
A long upper cover supported on stands, viewed from above.
Hands-on preparation of the outer bodywork surface.VIEW FULL IMAGE ↗
Hands-on preparation of the outer bodywork surface.
Surface preparation visible across the curved upper cover.VIEW FULL IMAGE ↗
Surface preparation visible across the curved upper cover.
The prepared cover positioned alongside SHOWTIME in the workshop.VIEW FULL IMAGE ↗
The prepared cover positioned alongside SHOWTIME in the workshop.
A closer view of the cover against the side of the hull.VIEW FULL IMAGE ↗
A closer view of the cover against the side of the hull.

AT THE WORKBENCH / 00:28

THE SURFACE.
THE HAND WORK.

The supplied workshop clip adds a moving close view of the unfinished cover. It supports the bodywork story; it does not establish a new performance claim.

05 — SHOWTIME

ALL THAT WORK.
ONE COMPETITION HYDROPLANE.

Not just an idea to talk about. A machine to build.

SHOWTIME hydroplane on its trailer, shown in the approved cinematic openingVIEW FULL IMAGE ↗
SHOWTIME on its trailer, from the approved cinematic opening.
An assembled view of SHOWTIME in the workshop.VIEW FULL IMAGE ↗
An assembled view of SHOWTIME in the workshop.

RGE / MECHANICAL WIZARDRY & MOTOR SPORTS

DESIGN IT.
BUILD IT.
MAKE IT WORK.

SHOWTIME is one expression of the same mechanical curiosity that runs through RGE’s shop work, development projects and testing.

EXPLORE MECHANICAL WIZARDRY →